-
Hello.
Yes, It is working fine on Voltronic VMIII. Thanks.
I want time based change of output source priority setting. like from 8AM to 5PM it should be in SBU and after 5PM it should be SOL.
This …
-
SolPipLog Working perfect on Axpert solar and VMIII Inverter. Now i am trying to run this with Schneider SunEzy 600E Solar inverter.
Please help me so that i can run this software with Schneider Sun…
-
Hi,
I’ve a problem with SolPipLog as he doesn’t seem to recognise two inverters connected in parallel. He only seems to detect the one connected to the USB port with a lower number.
I’ve already tri…
-
Hi,
Do you think this replacement for **490-7155-ND** will work:
https://www.digikey.ca/product-detail/en/knowles-voltronics/JZ300/1674-1005-1-ND/6021644
Thanks
-
Manufacturer: Numeric
Model Digital 800 plus
They don't seem to have online docs anymore afaict.
upsc:
```
battery.charge: 23
battery.voltage: 11.00
battery.voltage.high: 13.00
battery.voltage.low:…
-
It's not unusual to see some daisy-chained PDUs, connected together in master-slave mode, to only consume 1 IP address for their communication interface (generally, network card exposing SNMP data) an…
-
I have successfully tested the Legrand KEOR MULTIPLUG - nut recognized when the UPS is on battery and also when the battery is low whereas a shutdown signal is sent.
> Dec 7 10:01:30 maro-1 upsmon[1…
-
I have successfully tested the Mecer ME-1000-WTU - nut recognized when the UPS is on battery and also when the battery is low whereas a shutdown signal is sent.
> Aug 21 09:38:57 NI-1 upsmon[2959]: U…
-
Checklist for the 2.7.1 interim release:
- [x] @clepple: update dowload info for git
- [x] update client info with walNUT
- [x] address issue #30 (NSS support broke upsc output)
- [x] address issue #1…