-
As the pinout diagram resource is external to GitHub, but relevant to both this repository and https://github.com/HelTecAutomation/HeltecDocs, I add it as an issue here.
The title of the [HTCC-AB02…
-
HTCC-AB01 pin-out diagram show the below
but schematic and physical board show
- GPIO 0
- GPIO 5
- GPIO 4
not
- GPIO 0
- GPIO 4
- GPIO 5
![image](https://user-images.githubusercontent.com/…
KunYi updated
4 years ago
-
it would be great if the CubeCell devices would response to the DevStatusReq request with battery level and link margin.
-
Hi Just to report that the Board manager does not exist in Arduino Latest version shown is v0.0.5, even though on the Heltec Site.
Simon
-
I think this would probably be pretty difficult to achieve, but it would be nice to be able to run MicroPython, or CircuitPython on the CubeCell boards.
-
many compilation errors probably due to the renaming actions in 0.0.5 version, but I'm no expert
-> no problem on the same code when going back to 0.0.4
(edit : code was adapted to the new naming …
-
Hi Robert,
I am not quite sure, but if I understood correctly, you tried to port pycom's firmware to heltec wirless stick. This is very interesting, especially their networking module, which is nic…
-
I'm running the CubeCell board on a standard LiPo 18650 battery.
I cannot get LoRa to transmit properly when running on LiPo.
I am using the Ping Pong example, and when on USB power, it is working…
-
I can only find a binary version of the flash command, please add another repository showing the used Python script.
-
I'm using the CubeCell (HTCC_AB01) and the RGB example fails as follows:
_In file included from C:\Users\Dave\Documents\Arduino\hardware\CubeCell\ASR650x-Arduino\libraries\RGB\examples\RGB\RGB.ino:…