-
#i am having problems homing my printer please watch the video. [youtu.be] used your marlin config to set it up. now this is a folgertech printer that i build 2 year . saw your prusa I3 clone builds s…
-
When I use the MBL function in Marlin RC8 , the printhead start at 10mm above the printbed , and I must corrected more than -10mm to adjust the levelhight at Z 0.1 mm.
How can I adjust the Z hight …
-
I'm printing in the air after my start gcode does a g29 with servo mounted probe and auto bed leveling with Ramps 1.4. Any ideas?
[Configuration.txt](https://github.com/MarlinFirmware/Marlin/files/1…
-
Hi I've recently nearly-completed a Marlin 1.6.12 Ramps1.4 which I'm trying to use as a CNC for milling pCBs.
I have a normally open Z Min whih doubles up as a a probe using a crocodile clip on the…
-
Hello! I have some problems with RC8 and the bltouch as Z min endstop, hope you can help me. I have a MKS gen 1.4 board (#define MOTHERBOARD BOARD_MKS_13) and I have no problems using a mechanical end…
-
I had a discussion recently about the tool offset and switching tool and got a feature introduced so a tool switch can be done with out moving but as for today's RCBugFix I can't get the machine to re…
-
Hey Guys.
Total noob here. I ran Marlin V1 for LCD 2004 on my printer for over a year now.
I added some fans on the aux pins and LED lights to extruder head for those late night prints. Added …
-
Z CLEARANCE BETWEEN PROBES does not work with bltouch.
G28 works beautifully, G29 does not work.
The z axis does not move up, after the first measurement point.
``` cpp
#define BLTOUCH
#define Z_ENDS…
-
I recently configured RCBugFix and uploaded to my Azteeg X3 Pro board and I can not get the autolvl to work! My probe works fine and probes the defined points correctly but when it prints, the nozzle …
-
I'm running the latest RCBugFix, I've just modified my printer to use dual stepper drivers for the Z axis (I had problems with one side of the axis drifting over time with the single driver for both).…