-
```
if not have_power_vector_gfsk:
part_size += append_power_vector_gfsk(additions, str_list, data_indent)
have_power_vector_gfsk = True;
if not have_power_vector_edr2:
part_size += …
-
Hello,
I was trying your RX_Demo on Raspberry Pi 3, but I got stuck at the beginning.
I've tried running `sudo ./RX_Demo -v -a3 -c1 -f868 -m100`, but the only output I got was this:
```
CC1100 S…
-
Not receiving with the lib on Raspberry Pi.
Since two RPis are one foot apart, only left antenna on receiver. I verified using correct GDO2 pin with an LED, G25.
sudo ./RX_Demo -v -a3 -c1 -f434 -…
-
When i decoding using dsd on linux i always get error Unknown burst type: 1101
`uname -a` : Linux debian-t60 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26) x86_64 GNU/Linux
Digital Spe…
-
This is a tracking issue for improving the FSK demodulation signal processing chain.
My intent is to make use of the FSK modem from David Rowe's codec2-dev repository (see here: http://svn.code.sf.…
-
Right now we're using the same config on the cc1201 as we used before on the cc1201. We should be able to change some parameters to get things a good bit faster. We also may want to check out things…
-
... in order to allow choosing modulation modes BPSK, O-QPSK, and sub-modes (speed), without recompiling.
See: RF212B data sheet p. 117
-
It seems that the RadioTap parser is ignoring the [EXT bit (bit 31)](https://www.radiotap.org/#extended-presence-masks) in the RadioTap "present" word. This results in it parsing the subsequent "pres…
-
As per https://github.com/Lora-net/LoRaMac-node/issues/417, EU868 DR_7 should use GFSK with BT 0.5. The SX1272/SX1276 code uses the default register settings, which leads to FSK usage instead of GFSK.…
-
The implementation for SX1272/SX1276 uses FSK modulation for the EU868 DR_7.
Looking at AN1200.23 (SX1272) and AN1200.24 (SX1276) it states that GFSK with BT 0.5 is supposed to be used.
The new…