-
```
❯ cgra-mapper test_DefineSub16.json test_DefineSub16_mapped.json
Loading test_DefineSub16.json
Running Pass: rungenerators
In Run Generators
Done running generators
Running Pass: verifyinput…
-
OLED2864 is a module based on SSD1306 with I2C interface. Display initialization requires a Reset PIN to be wired and toggled, otherwise it won't react to I2C communication. Once this step is done it …
-
Hi, im having issue on the result shown on serial monitor, my connection is as below:
VCC-----3.3V ( tried connected to 5V but getting same result)
GND-----GND
SCL-------A5
SDA------A4
AD0------G…
-
### Description
Although numerical linearization seems to be working as expected, the symbolic one yields an incorrect result. There is a collections of reports on this matter reported by the Ope…
-
Names with references to the GND shouldn't link directly. Better would be a pop-over showing the normalized name from the GND with a separate link.
-
-
GND ID are widely used in germany it could be appropriate to add the GND identifier to the list of available identifiers for person and organisation
https://www.wikidata.org/wiki/Property:P227
-
A visual representation of the data about one entity. Can be included in entity cards.
Example for inspiration: [GND-Explorer](https://explore.gnd.network/gnd/118561448/relations?term=Johannes%20Ke…
-
Hello,
With your STM32F405 Feather Express card, the PB12 pin (cardDetect) is always to 0 (GND).
This is due to a short circuit with the card reader double pin 10
![cardReader_STM32F405-Feather-E…
-
In GitLab by @adumont on Nov 29, 2021, 15:44
When writing it hangs at reading/verifying:
```
$ minipro -p AT28C256 -w forth.bin
Found TL866II+ 04.2.128 (0x280)
Warning: Firmware is newer than expect…