-
```
Mavlink action commands not acknowledged
```
Original issue reported on code.google.com by `dewei...@gmail.com` on 21 Mar 2011 at 6:13
-
The following template is for Issue/Bug reporting only. https://docs.qgroundcontrol.com/en/Support/Support.html#github-issues
For questions about how to use or build QGC see: http://qgroundcontrol.…
SFA32 updated
4 months ago
-
I was able to build and install the project.
I checked mavlink message is running on `/dev/ttyHS3` so I changed the `example.yaml` file on `/etc/mavlink-serial-bridge` accordingly.
Then I tried to r…
-
### Describe the bug
When PX4 is connected to a NMEA GPS unit (UM980 in my case) the GPS status reports a rate of 0 B/s and an update rate of 0hz.
Typical output shown above.
### To Re…
-
#### Issue details
I am trying to connect Ardupilot over WSL1 with Mission Planner on Windows, After creating the flight plan, I go to Simulation, choose model hexa, click on Multirotor, and download…
-
修改一下PX4源码，将src/modules/mavlink/mavlink_main.cpp里面有关ATTITUDE_QUATERNION、HIGHRES_IMU的参数全部修改成200.0f，应该是需要修改5处，然后编译一份固件
实测有效
-
I am currently trying to forward MAVlink messages from QGroundControl to a Raspberry Pi. I'm using MAVSDK to listen to a specific UDP port:
`ConnectionResult conn_result = mavsdk.add_any_connection…
-
```
Mavlink action commands not acknowledged
```
Original issue reported on code.google.com by `dewei...@gmail.com` on 21 Mar 2011 at 6:13
-
```
Mavlink action commands not acknowledged
```
Original issue reported on code.google.com by `dewei...@gmail.com` on 21 Mar 2011 at 6:13
-
```
Mavlink action commands not acknowledged
```
Original issue reported on code.google.com by `dewei...@gmail.com` on 21 Mar 2011 at 6:13