-
In the process of testing the VU command changes and I can't get the engine to start without hanging. It gets to the info: Connecting to G2... most of the time and made it to info: Configuring G2 once…
-
To reproduce, open a serial connection to TinyG and send `;%g28.2 x0 y0 z0`
Expected behavior: nothing happens, it's a comment!
Observed behavior: homing sequence happens:
```
;%g28.2 x0 y0 z0
{"sr…
-
M2 is supposed to stop the program, and, in particular, it calls G92.1.
In practice, the output differs a bit.
Here is G92.1:
```
> {"sr":""}
{"r":{"sr":{"mpox":0.000,"mpoy":0.000,"mpoz":0.000,"mpoa…
-
This almost happens at random spots but as you can see here:
384907 [ResponseParser] INFO tgfx.ResponseParser - Got Line: {"sr":{"line":1485,"mpox":75.579,"mpoy":142.911,"momo":0}} from TinyG.
the …
ril3y updated
11 years ago
-
I have been trying to cut a 2d part with tgfx and two times in a row, the machine has stopped running midway through, with the following information on the terminal:
[+]User has entered text mode. T…