-
A code for RGB LEDs should be written for the robot and the robot cart. The code should be able to change the LED colors in accordance with alliance color, lifting mechanism, status of the cube taking…
-
here's what log shows:
error: zigbee.0 Unknown device model GL-C-009 emit event readRsp with data:{"cid":"genBasic","data":{"manufacturerName":"GLEDOPTO","modelId":"GL-C-009","powerSource":1}}
error…
-
Suite à mon message sur le nouveau forum Jeedom, je te remonte @KiwiHC16, l'impossibilité d'inclure deux nouvelles ampoules IKEA que je viens d'acheter.
J'ai fais le test avec des ampoules différen…
-
Is there a reason, why we have to use gpio2 on ESP8266? On my WMOS D1 MINI I'd like to use D1 (wich is gpio5). Could i change wled05_init near line 244 to use LEDPIN also on ESP8266?
Kind regards
-
I am seeing zigbee2mqtt restarting in a minute after it fails to ping a router, for example below is the tail of log file:
```
3/8/2019, 1:24:58 PM - info: MQTT publish: topic 'zigbee2mqtt/0x00124b0…
-
Hello!
First of all a big thank you to you and the people who help you! rpi-rgb-led-matrix and flaschentaschen are great projects.
Here is my project:
I'd like to build a led cube with 5 32x32 …
-
On the pr and master, the copter does not detect the radio, only on stable works well
first, send to manual mode and later to hold mode
https://review.px4.io/plot_app?log=bf71d883-0596-4723-95cc-ed7…
-
I am trying to put the same image on 6 panels and I am using the Active-3 adapter board. I have 4 32x32 boards wired to Panel 1 and 2 32x32 boards wired to Panel 2 on the Active-3. I just can't figure…
-
I tried to pair the aqara window contact sensor several times and do not get it paired.
I get the following log entries
`zigbee2mqtt:info 4/20/2019, 8:26:13 AM New device 'undefined' with address 0x…
-
-------- beginning of main
01-09 04:29:25.075 445 445 W auditd : type=2000 audit(0.0:1): initialized
01-09 04:29:28.599 445 445 I auditd : type=1403 audit(0.0:2): policy loaded auid=429496…