-
Hi there,
I have been developing on M5 Stack Core2 with this library for a couple of weeks now and all has been good! Yesterday I noticed that I was still on v0.0.1 so I upgraded to v0.0.3, however…
-
### Describe the problem/bug
Installed SCD4x dependency and connected[ Seeed SCD41 Sensor](https://wiki.seeedstudio.com/Grove-CO2_%26_Temperature_%26_Humidity_Sensor-SCD41/). Sensor is detected but…
-
Hello,
If the scd30 is not properly wired, then the function `airSensor.begin()` will return false, same for `airSensor.dataAvailable()` if it was disconnected after being initialised.
But if on…
-
I spent a couple of nights trying to read data from a SCD30 connected to a Linux machine through a MCP2221 following [this example](https://circuitpython.readthedocs.io/projects/scd30/en/latest/#usage…
-
@andrei-tatar
Currently the SmartNora "Sensor" node supports Temperature and/or Humidity.
What is your opinion about extending this Sensor Node with other sensors, as presented at:
https://develo…
-
### Hardware:
Board: ESP32 Dev Module, ESP32 Wrover
Core Installation version: 2.0.1
IDE name: Arduino IDE
Flash Frequency: 80Mhz
PSRAM enabled: …
-
Hi,
I got into the world of Arduino and raspi during Corona so Im quite a noob, especially with raspi.
I cant get the SCD30 to work on raspi and I dont know wether this is because of this partic…
-
### The problem
I'm trying to create custom I2C sensor components. Since the update to 10.3 the custom sensors don't compile due to not being able to find Wire.h. Wire is listed in the libdeps and th…
-
### The problem
Looking at the [code](https://github.com/esphome/esphome/blob/dev/esphome/components/sps30/sensor.py#L94), it seems that `pm_size` should be supported. However, it does not seem to be…
-
Hello! I'm attempting to use this with a Raspberry Pi CM4 Board, which I thought should be processor identical to the Raspberry Pi 4, however, this utility doesn't seem to work for me.
When I inspe…