-
Errors on running nft as kernel modules are missing from:
/lib/modules/5.4.40-v7l+/kernel/net/netfilter
Missing nf_tables.ko and all relevant nft_*.ko files
sudo apt install nftables
nftables …
-
The clock frequency for I2C1 (that is, the I2C controller for physical GPIO pins 3 and 5) is wrong; it is too low by a factor of 5/8.
The default setting is supposed to be 100 KHz but the actual cl…
-
### Describe the bug
Prior to Bookworm, I enabled the Pi to act as a Wi-Fi Access Point (in part) via:
```
# /etc/hostapd/hostapd.conf
country_code=US
interface=wlan0
ssid=my-network
hw_mod…
-
Hey marcell, how is it going?
Alexandra has told me you had some questions about test reports and fixing the project.
first thing I think you should do is comment the reports, the problem is tha…
-
Do not know if this is a firmware issue or a shell issue - since I updated, holding the power button for 6 seconds no longer produces the on-screen shutdown slider UI, so the only was I can shut down …
-
Hi! Thanks for your plugin.
How can I edit an existing resource on a specific stage? Imagine I have the stages :stage1, :stage2, :stage3. I fill all the stages and the object is created. I then want …
-
I am running into this error and I am not sure what is wrong.
`[11:01:27] Begin /home/install17/pi-gen/stage4
Creating backing image: image-stage4.qcow2 `[10:18:05] Begin /home/install17/pi-gen
…
-
## (x,y,z)
stage1
(0,0,0.5)
(0,0,-0.5)
## (0,1,0)
stage2
(0,0,0.71)
(0,0,-0.71)
(0.71,0,0)
(-0.71,0,0)
## (0,1,0)
stage3
(0,0,0)
(0,0,1.5)
(0,0,-1.5)
(0,1,0.75)
(0,1,-0.75)
(0,2,1.5)
(0,2,-1.5)
## …
-
### Describe the bug
On Pi5 Bookworm an external usb touchscreens seems to kill the xHCI controller. The same device worked fine with a previous Pi4B (Bullseye).
I am trying to connect a touchscre…
-
Hi, i'm interesting in RLE. it is a nice work.
i see you use soft_argmax on HRNet, but i didn't see it in this repo. can you introduce the implement detail about this? eg. are you using the softmax o…