-
Hey there, having the latest version of Pristmatik and f.lux - LED values do adjust but only so subtle (whenever f.lux shifts towards warm colours). Is it a known thingy?
Also, Windows 10 Night Lig…
-
Hi all,
so I've built myself an ambilight using this tutorial: https://www.youtube.com/watch?v=juC-3imLoTQ
Initially it worked fine and the LEDs always turned off when shutting down my PC.
But …
-
I'm having two problems with Prismatik on my Windows 10 PC that seem to be related.
1. I have two profiles-- one for ambient light, and another for capture. When using the ambient profile, I can s…
-
Hello
I have problem with perfomance on Imac 5k
3.4GHZ core I5
12GB 2400MHZ DDR4
Radeon Pro 570 4096MB
the proccess name "WindowServer" eat up to 70% of CPU, down to 30% if set resolution to Fu…
-
### Firefly Luciferin version
2.16.4
### Glow Worm Luciferin version
NA
### Firmware type
FULL
### What is the stream method?
WiFi Stream
### Fiefly Luciferin config file
_No response_
### R…
-
- [x] I confirm that this is an issue rather than a question.
## Bug report
As topic states. With 2.0.14 I get severe playback stuttering with all source material. Some times…
-
Com4 is set, 9600 Baud is set, RGB is set like in Ambibox
39 LEDS are set like in Ambibox
No lights working ..... nothing
USB Controller is CH340 on Com4
Latest Win 10, CH340 Driver was installed …
-
I know I've seen it here b4 but I can't find it sorry.
Back story I currently have a tensy and a octows2811 to drive 506 LEDs. I have good performance and was contemplating going from 96led/m to 14…
-
Hi,
Thanks for your project, I have found it on www.tweaking4all.com website ;)
I have a Arduino Uno, a WS2812B LED strip and a Windows 8 HTPC. Is it possible to use Hyperion with this hardware and yo…
-
Hi,
bought one of those kits on AliExpress some time ago. Never been satisfied with the framerate though. The kit consisted of Arduino Uno and 2812 LEDs. To cover my 55" TV, I needed 226 LEDs. I ha…