-
LeafMiner 0.0.13
[Mini module ESP32-S3-Zero](https://www.aliexpress.com/item/1005006508849930.html), it has chip ESP32-S3, USB-C connector, 18 pins, on-board antenna, RGB LED and two buttons.
De…
-
using the ACM example on an Espressif ESP32-s3 dev kit. Arduino 1.8.19. Library version = 2.00
Example compiles fine and uploads ok.
Plug in any USB device (powered locally as ESP32-s3 host port d…
-
Hey,
I have problem with ESP32-S3, device just crash after wifi connection in AP Mode with log _CORRUPT HEAP: Bad tail at 0x3d81cbef. Expected 0xbaad5678 got 0xbaad5600_
I build image for ESP32…
-
Hello,
I was trying to setup three wires SPI for my application using an ESP32-S3, and it appears that the esp-hal API doesn't expose this setting. Would it be possible to expose this functionality ?…
-
Only raise issues for problems with the library and/or provided examples. Post questions, comments and useful tips etc in the "Discussions" section.
To minimise effort to resolve issues the followi…
-
With #192 merged we now have a TWAI driver for the ESP32-C3. We should support all remaining devices as well before our next release is published. This can be done all in one swing or with a PR per de…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
I'm trying to use SPI3 of a ESP32 S3 for a SD-card.
How to do that? ( VSC-PlatformIO-Arduino environment )
My main.cpp:
`#include
#include
// #include // required?
// #include …
-
### The problem
The device loads the firmware successfully, however the site never prompts for wi-fi credentials. There's no way to configure it for wi-fi so it just starts and says "No Wi-Fi". The t…
-
Hi Dear Wolle!
Is it possible to allocate a separate pin for ESP32 S3 on which a high level would appear in sleep mode. I would like to use it to cut off the power supply to the audio power amplifier…