-
[klippy.log](https://github.com/KevinOConnor/klipper/files/4296017/klippy.log)
I recently installed an EZABL probe on my printer and went through the process of tuning it, z-offset, and bed mesh. I…
-
Hi!
It would be grat if Bed Level Visualizer would support Klipper firmware too.
Klipper firmware mesh works via BED_MESH_MAP -gcode, which prints out mesh map as a json file.
[https://github.c…
-
#### What were you doing?
1. Connect to printer (LulzBot TAZ 6).
2. Click on 'Upload to SD'.
3. Pick a file (I used a small .gcode file that had successfully printed. I think any file will do).…
-
I'm working on #32 (more like a modern widget port of https://github.com/kreso-t/cncjs-kt-ext in React) and I'm facing a problem calculating the area that the probing should commence. I currently can'…
-
INFO] ------------------------------------------------------------------------
[INFO] Reactor Summary for ugs-parent 2.0.8-SNAPSHOT:
[INFO]
[INFO] ugs-parent .......................................…
-
For some weird reason tabs display 3rd party plugins first after hitting close or save in settings even if no changes were made.. Refreshing the UI resolves. I am not using any custom ordering.
Not…
-
I am not sure where to ask the question, but, is any form of multi-point bed leveling coming in the near future?
Thank you!
w1ebr updated
2 years ago
-
Hello,
I encounter a problem with the Mesh, the nozzle is still too high on the left side and still too much crushed on the right side of the bed.
at first I made a Z_tilt
10, -30
10, 220
320,7…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I was issuing the G35 command from Pronterface. My intention was to level my bed using …
-
Hi! I am getting ready to release a new GCode visualizer called PrettyGCode (see below). It used to be an OctoPrint plugin but now I am porting it to a stand alone web app that uses the moonraker API …