-
Hey! Thanks for sharing this.
I have tested the ESPHome templates and there seems to be an error on the display used. I changed the model to be `ILI9342` as the `ILI9341` did not work on my board …
-
I found some problem when running the "graphicsTest.cpp" code.
1. When I commented out "#define TFT_USE_SPI" (in line 51) and compiled it. It switched to use Adafruit_ILI9341 class, and the error came…
-
### The problem
Touchscreen no longer works. It does not register any input. There is nothing in logs, even on very_verbose. It's as if it's not being touched at all. I suspect it has to do with th…
-
I bought also a esp32-2432S028R, Chip identifies with ESP32-D0WD-V3 (revision v3.1)
To get in running I had to add/change:
platform = https://github.com/tasmota/platform-espressif32/releases/downlo…
-
Good evening, I used the compiled version "esp32-2432s028r_full_4MB_v0.7.0-rc9_c200edf" correctly on my device, now I have updated to the rc12 version but unfortunately I have display problems on the …
-
can you specify the lib versions you were using also the version of the ESP8266 ?
is it 2.4.2 or later or already 2.5.x ?
lot have changed since a year ago.
im trying to downgrade everything as for…
-
**Describe the problem you have/What new integration you would like**
The ILI9488 display controller is used in some "larger" TFT displays (https://www.aliexpress.com/item/1005003773199628.ht…
-
I am working on an Arduino MKR Zero based project that combines an MKR CAN Shield as well as a touch screen (2.4” 240x320 using the Adafruit ILI9341 library).
When connected alone, the CAN Shield …
RBVGH updated
4 years ago
-
I followed with the guide in https://github.com/nanovna/NanoVNA-V2-firmware and compiled the binary.bin , but I found its size (94,716 bytes) different with binary-ili9341.bin(94,780 bytes) ,witch can…
-
Hi, My display on the GY LCD MLX90640 is broken. I replaced it with "IPS 2.4 inch 24PIN TFT LCD Color Screen ST7789 Drive IC 240 (RGB) * 320 MCU 8 / 16Bit Interface". All colors are inverted :-). What…