nanovna-v2 NanoVNA2-firmware issues

nanovna-v2 / NanoVNA2-firmware

Firmware for NanoVNA V2

https://nanorfe.com/nanovna-v2.html

222 stars 87 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

No signal generated above 140MHz

#82 supergps1 opened 1 year ago
3
Referance clock at 25MHz

#81 Jampag opened 1 year ago
0
V2_2(clone) won't boot up screen stays white

#80 wojciechna opened 2 years ago
0
Are there 6 GHz plans?

#79 KimIV opened 2 years ago
0
How to calibrate the NanoVNA through Python?

#78 0xCoto opened 2 years ago
3
Can I change baud rate?

#77 daehwa opened 3 years ago
2
Group Delay Calculation Does Not Unwrap Phase

#76 roseengineering opened 3 years ago
0
Add example Notebook for usage with NanoVNAV2

#75 werwaswarum closed 12 months ago
0
FFT_SIZE too small for TD lowpass mode

#74 gfuer opened 3 years ago
0
Unable to compile (libopencm3 error)

#73 nieldk opened 3 years ago
3
@cjheath Renamed DFU mode to Bootload mode, to make it clear that Bootload is not DFU. Fixed compile warning.

#72 cjheath closed 3 years ago
0
Added STLink instructions and clarification on DFU modes

#71 cjheath closed 3 years ago
0
Sometime Nanovna freezes while moving the marker with the pen

#70 simonepernice opened 3 years ago
0
NanoVNA as spectrum analyzer

#69 Harvie opened 3 years ago
0
Firmware compatibility with chinese devices

#68 Harvie opened 3 years ago
5
Measure timing and option fixes

#67 DiSlord closed 3 years ago
0
update suggestion

#66 dustinoff opened 3 years ago
0
git reset --hard ... does't work as describes in Readme.md

#65 dl9sec opened 3 years ago
0
NanoVNA V2 Plus4 display flickers

#64 phlipse opened 3 years ago
11
Cross compiling on a Raspberry Pi...

#63 dl9sec opened 3 years ago
0
Fix bbgain calibration

#62 DiSlord closed 3 years ago
0
Compensate IFFT window / zero-padding loss in TD

#61 cho45 opened 4 years ago
1
Rework capture code and fix marker hang issue

#60 DiSlord closed 4 years ago
0
add capture via usb feature (reserve 0xee of register)

#59 cho45 closed 4 years ago
0
Fix some marker issues

#58 DiSlord closed 4 years ago
0
Moving a marker back and forth crashes VNA

#57 Mike4U closed 4 years ago
4
Touch screen calibration data reset after power cycle on 20201013

#56 DJRaov closed 4 years ago
2
show calibration data when select recall

#55 DG9BFC opened 4 years ago
1
using NanoVNA V2 as PC controlled CW generator/sweeper

#54 ok1vaw opened 4 years ago
1
Calibration slots with name?

#53 eried opened 4 years ago
10
Use new mculib to fix compiler errors

#52 wutje closed 4 years ago
0
Same Firmware Versions for newer Revisions

#51 zarath closed 4 years ago
1
20200926 release with SAAS V2

#50 jmseight closed 4 years ago
4
add more memories

#49 DG9BFC closed 4 years ago
4
Cw mode fix

#48 wutje closed 4 years ago
1
incorrect git commit in compiled version 20200916

#47 douardda opened 4 years ago
2
Add linear interpolation for calibration data

#46 DiSlord closed 4 years ago
0
Use better approximate values for n/d in si5351 frequency apply

#45 DiSlord closed 4 years ago
0
Fix graticule display in zero span mode

#44 switchabl closed 4 years ago
0
Makefile improvements

#43 wutje closed 4 years ago
0
Led lights

#42 eried closed 4 years ago
5
Tag and publish a new version of the firmware

#41 douardda closed 4 years ago
4
Marker seems incorrect, FW unstable

#40 mare001 opened 4 years ago
1
Recommended documentation for nanovna v2?

#39 eried opened 4 years ago
2
Dmesg Always prompt "LIBOPENCM3 DID NOT ENABLE FPU!"

#38 lzqgdt closed 4 years ago
2
Hang up with 201 sweep point with Transform on

#37 lzqgdt closed 4 years ago
0
Use more compact FFT table

#36 DiSlord closed 4 years ago
0
compiled binary.bin cannot work

#35 antboy1979 opened 4 years ago
10
Touchscreen calibration wrong when display is flipped.

#34 ph2lb opened 4 years ago
2
First S21 measurement out of tolerance

#33 zarath closed 4 years ago
2