-
Quite simple to reproduce on Arduino Nano 33 BLE Sense:
```
void setup() {
Serial1.begin(100000, SERIAL_8E2);
}
void loop() {
}
```
Expected: Clean startup.
Actual result: Mbed cras…
-
Hi.
I have tried using the I2C bus via the Arduino Wire library under the Nicla board and I get an mbed Hardfault. Here is a simple program that triggers the fault:
```
#include "Nicla_System.…
-
**Target board:** DISCO_F407VG
**Mbed version:** 5.15
I am using radio modules based on SX1276, produced by different manufacturers. I want to try a 2W 1262 nicerf module ([LoRa1262F30](https://www.…
-
The current version of the ST sensor library is a bit old, there's newer (though still old) version available.
https://os.mbed.com/teams/ST/code/X_NUCLEO_IKS01A2//rev/138a7a28bd21/
Is the latest…
-
### :bug: Bug Report
On a Nano 33 BLE with a MPC2515, the UAVCAN-Heartbeat-Publish example locks up. The problem appears to be related to locking and/or interrupts, as it hangs when trying to aquir…
-
I keep getting the following error when trying to use I2C2 pins A4(PA_12) and A5(PA_11)
```
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: Fatal Run-time err…
-
Hi, can i get a complete example?
```
from avatar2 import *
class HelloWorldPeripheral(AvatarPeripheral):
def hw_read(self, offset, size):
ret = self.hello_world[:size]…
-
There is a very nice example of complex fft (cfft) available here:
https://github.com/ARM-software/CMSIS_5/blob/develop/CMSIS/DSP/Examples/ARM/arm_fft_bin_example/arm_fft_bin_example_f32.c
Howev…
-
It would be very helpful to have a few examples on how to use the timers on core v1 (guess it would be available also on core v2 in the same way, though MBedOS may already provide some high level inte…
-
Using mbed_rp2040/3.1.1
Board Variant: Raspberry Pi Pico
Have included the following libraries in my test example code (based off the AccessFlashAsUSBDisk example):
```
#include "PluggableUSBM…