-
### The problem
Integration adds successfully. Home Assistant and the Screenlogic are on 2 different VLANs and I pass traffic and use helpers to get from the former to the latter. Using IP and port i…
-
I have an intellicenter i8PS with an ultratemp heat/cool heat pump. when I have the unit set to heat, the cooling icon shows in the dash panel and the dashpanel says "cooling". also, the radio button…
-
**Describe the bug**
I have an EasyTouch that controls all of my Pentair equipment. I have the Pool Controller running this stuff perfectly. However, I also have a Hayward Aquarite Salt system. Is th…
-
not sure if this is an issue or if it's me.
everything was good and I was able to add sensors manually, then noticed a couple updates ago that my sensors are NOT available to add as individual device…
-
I noticed today that the cool setpoint for a spa body (the data that comes back in SLPoolStatusMessage.js) seems to track along with the air temperature reading. At first I thought I had a bug somewh…
-
**Describe the bug**
This is more of a new request then a bug...
The nodejs-poolController does not recognize the SolarTouch controller, and does not discover my IntelliFlo VS or IntelliChlor.
**…
-
### The problem
Type VS pumps have RPM and Watts attributes. There is no value for GPM value for type VS pumps.
Home Assistant reports 255 GPM regardless of speed setting for type VS pump. The co…
-
Hello folks. I am a noob in all things Raspberry Pi but gave it a try to install the Pool Controller following the very detailed instructions MyAZPool provided in TFP. Installation of both applicat…
-
### The problem
Attempting to get the new Pentair ScreenLogic Integration running. When adding the integration my Pentair adapter/gateway is found on the network and the integration supplies the cor…
-
**Describe the bug**
Dual mode seems to show as heat mode "off" via the API and UI
**To Reproduce**
1. Set the Easytouch 8 to heat mode "Dual"
2. Wait
3. Check UI and API to see mode is "off"…