-
Wir brauchen einen MQTT Server, richtig?
Was würdest empfehlen, für Leute die wenig Ahnung haben?
Ich finde, die einfachste Installation ist mit Home Assistant.
Mit Oracle Virtual Box auf Windo…
-
current status: CAN is set to 500 kbps
improvement: CAN can be set to 500 kbps or 250 kbps
Background
500 kbps are used to connect diyBMS and VenusOS (speed 500 kbps). Inverter like Multi Plus II…
-
### The problem
Nach Update auf 2024.2.0 bzw 2024.2.1 funktioniert die Gardena Integration nicht mehr
### What version of Home Assistant Core has the issue?
2024.2.0, 2024.2.1
### What was th…
-
**Describe the bug**
I have the Controller Board connected via CAN to my Inverter Deye SUN-12K- SG04LP3.
For the communication I have choosen the PYLON protocol in the diyBMS Controller.
My Inverte…
-
### What happened?
I just set up openDTU on Battery on an openDTU Fusion board, used to control a Hoymiles HMS1600.
When I set up the Dynamic Power Limiter (Target Power to 30). But when it starts…
DerWe updated
6 months ago
-
My recent install of batmon-ha on a standalone Raspberry Pi is working reliably but doesn't survive a reboot after a power fail.
Logging on to the Pi and running:
sudo systemctl status batmon.se…
-
### Is there an existing issue for this?
- [x] I have searched the existing issues
### Current Behavior
There will be multiple enhancements suggestions. Therefore they'll be marked with & and…
FajnB updated
11 months ago
-
Hi,
I use [irekzielinski](https://github.com/irekzielinski) [Pylontech-Battery-Monitoring](https://github.com/irekzielinski/Pylontech-Battery-Monitoring) solutions since years at 2 different locati…
-
Hi, just trying to set this up - very excited to make better use of the BMS. I am using an ESP32 and changed Serial1 to Serial2 (the board i have Serial1 is attached to an OLED display), comms estab…
-
Hello,
I love your project. I ordered the pcb and started soldering. I also checked for the 120 Ohm on the 485_2_TTLs.
But I don't understand what are the connectors U4 (Sensors written on the PCB…