-
I am having an issue where i get "timer too close" at unloading sequence. Print is running fine for a couple of hours with many toolswaps and then suddenly i get this error, always at unloading. I'm r…
-
# Summary
While reading from the topics ur_hardware_interface/rtde_data/target_q and ur_hardware_interface/rtde_data/temperature sometimes connection is brakes and we get log messages as follow:
…
-
Running the yolo example has these results.
```
./darknet detector test cfg/coco.data cfg/yolo.cfg yolo.weights data/person.jpg
layer filters size input output
…
-
Home Assistant founders (and Nabu Casa) have recently among other things announced: "[SL Web Tools](https://github.com/NabuCasa/sl-web-tools)" project (short for "Silicon Labs Web Tools") is available…
-
File downloaded from https://bin.equinox.io/c/VdrWdbjqyF/cloudflared-stable-linux-arm.tgz
```
pi@raspberrypi:~ $ ./cloudflared -v
Segmentation fault
```
```
pi@raspberrypi:~ $ uname -a
…
-
Don't know if this is possible at all, but I'd like to move the pin which is used
for transmitting to another GPIO pin, is it doable at all ?
GPIO4/pin 7 is usually used by the RTC module addon (it …
-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …
-
Seeking back to the start of the file once subtitles does load gives subtitles for the initial section also.
This may be an issue with how Jellyfin feeds us the data.
-
-
Hi @b4rtaz
I was tinkering a bit over the weekend and figured it might be possible to create a version of worker/main that accelerates the inference by offloading some work to the GPU to handle.
…