-
I've had trouble getting a Pico W to connect to WiFi after the UART has
received data.
For example the code below often doesn't connect to the network if
serial data is being sent to pin 2 of th…
-
Hello, pico-feedback team,
I am reporting a consistent issue that occurs when the battery-powered Raspberry Pi Pico W is connected to a host PC via a USB Type-C connection. Below are the details an…
oyama updated
3 months ago
-
I am just asking because I have a few picos with me. Just want to make sure that Pico is powerful enough to do this.
-
I am using the Raspberry Pi Pico board's native USB Host hardware to implement a USB MIDI Host driver for TinyUSB in the [usb_midi_host](https://github.com/rppicomidi/usb_midi_host) project. The drive…
-
To operate the inverter from the main FSM, we need the pod operation program running on the main Raspberry Pi to communicate with the inverter control running on the Pi Pico. We can use serial communi…
-
On page 21 of the 2024-05-02 version of Getting Started with Raspberry Pi Pico, under SWD Port wiring it says to connect GND(Pin 20) to SWD GND, GPIO24(Pin 18) to SWDIO and GPIO25(Pin 25) to SWCLK for…
-
### Operating System
Linux
### Board
Raspberry Pi Pico
### Firmware
examples/host/cdc_msc_hid
### What happened ?
When hub is connected device seems stuck in a loop instead of detecting the hub…
-
I managed to run the sync and async modes on the rpico with the vs1053 breakout, but it sounds glitchy, at 128. Which parameter should I check to control this issue?
On Arduino I can play MP3 files s…
-
### Port, board and/or hardware
Raspberry Pico
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; Raspberry Pi Pico with RP2040
### Reproduction
I took my program code and stripped it dow…
-
This issue serves as a tracker for remaining tasks to tag a 2.2 release candidate, and as a tracking mechanism for release testing once that is done.
## Blocking Tasks
- [x] Merge remaining timer…