-
### Version
_2.1.0_
### Operating system type + version
_Windows_
_any_
example generated GCODE
```
G21 ; set units to millimeters
G90 ; use absolute coordinates
M82 ; use absolute distan…
agvol updated
2 years ago
-
I initially noted this here [https://github.com/prusa3d/PrusaSlicer/issues/11043](url)
I have been trying to use your PP to achieve the first layer for all then sequential without luck. The closest…
-
Discussion: https://www.reddit.com/r/MachineLearning/comments/hu7lyt/p_yolov4tiny_speed_1770_fps_tensorrtbatch4/
Full structure: [structure of yolov4-tiny.cfg model](https://netron.app/?url=https:/…
-
I train YOLOv4-csp with resolution `384x384`,the loss is still greater than 16 after 60000 iterations,while i can get good results in YOLOv4 with `384x384`。I update the latest version of darknet,and t…
-
Hey, @ardeal I want to produce similar profiling as you could see below that tells that how much time is taken by each layer in the yolov5. The [ultralytics/yolo5](https://github.com/ultralytics/yolov…
-
More an issue for @Melsteroni - @bshalpern can probably skip for now...
For this project, I have been assuming that the resolution I used for the spp/biodiversity risk project would be a fine nativ…
-
Either via UART, UART over power line, or Bluetooth
UART -- nRF52840 has 2 UARTs, so we can use the other one
UART over powerline -- save on cabling, and reuse the existing power connection
-
I have been trying to run M2FCN (https://github.com/BinWang-shu/M2FCN), but I get these errors. Caffe builds successfully. No errors. The error on running ./examples/final_results/solve.py:
WAR…
-
Hi @AlexeyAB,
I'm using this csresnext50-panet-spp-original-optimal model and I have two RTX 2080 Ti but the training time is about 340. Is it OK?
GPU: 2X RTX 2080Ti
Storage: SSD
CPU: Core i 9…
-