-
*Sent by (dccextended@gmail.com). Created by [fire](https://fire.fundersclub.com/).*
---
## Chris created a ticket
Name: Chris Metcalfe
Email: ceejayemm@hotmail.com
Timezone: 0
Software: EX-Com…
-
Reference platform.txt: https://github.com/arduino/ArduinoCore-renesas/blob/1.0.1/platform.txt
Example PlatformIO invocation:
>arm-none-eabi-g++ -o .pio\build\uno_r4_minima\FrameworkArduino\api\Pr…
-
Lazy stacking of floating point context is enabled by the LSPACT bit in the FPU->FPCCR register;
It causes the floating point registers to be stacked during an exception ONLY if a floating point inst…
-
Please add in the UNO R4 CAN library the support for transmit/receive of CAN frames also in SFF.
Preferred would be an own parameter in the message creation which allows to define either SFF (maybe…
srolf updated
12 months ago
-
hi i find that i even could not run the example
```
WARNING: library ArduinoECCX08 claims to run on samd, megaavr, mbed, mbed_nano, mbed_portenta, esp32 architecture(s) and may be incompatible with …
-
I documented how I tested BLE Uart [here](https://forum.arduino.cc/t/ble-uart-works/1148164). An incorrect Service UUID is returned if the sketch is modified to add a servo. The modified sketch is sh…
-
With the current release (actually current code as well) as has been mentioned on a few threads now including:
https://forum.arduino.cc/t/serial-print-from-isr-will-hang/1145292
If you run a sketc…
-
On the Uno R4 WiFi, I'd like to make use of the Renesas' chips SCE (Secure Cryptography Engine). According to the .h file, the chip does that peripheral.
https://github.com/arduino/ArduinoCore-rene…
-
This issue tracks the porting of boards and SoCs to https://github.com/zephyrproject-rtos/zephyr/issues/51833.
### SoC series: AGILEX
- [x] soc: AGILEX
- [x] board: intel_socfpga_agilex_socdk, …
-
There's tons of "writing on the wall" that the ESP32-S3 on the Uno R4 WiFi board is loaded with a firmware that makes the device appear as 1. A USB CDC device for the serial bridge, 2. A CMSIS-DAP deb…