-
Error when I ran
```
$ pwd
$HOME/development/rtems/kernel/erc32
# no error while building rtems5 for erc32
$HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/5 --ta…
-
I'm doing some tests using MB85RC16.
I have managed to make the examples work perfectly.
But if I include a new recording at another address he always writes at the beginning where the previous reco…
-
Whilst implementing the Windows support for FRAM I had to investigate this chip and learn everything about it. I took me a while to work out if I had the correct data sheets based on the documentation…
-
define variable “chipDensity” (line 63) but use “chipdensity” (line 67) cause compile error.
correct it, running ok
-
there is problem while working with random read of EEPROM in ESP32 idf, I have tested EEPROM by i2c scanner and its detecting also i can write multiple byte to EEPROM, i'am facing problem while read…
-
Hello,
Do you plan to expand your library to have a SPI version of those chips supported ?
Thanks.
-
In commit e4f963a3 @dpgeorge changed machine.I2C to use the generic I2C interface. My reading of this is that its doing bit banged I2C.
Is this the intention?
Shouldn't machine.I2C be using HW I2C w…
-
Hardware: ESP-12E
Core Version: 2.3.0
Hi guys! Once more I'm stuck and need a pointer in the right direction. I'm using a ESP12E on NodeMCUV1.0 dev board. The ESP functions as a SD webser…
-
Just updated and it took me a while to narrow down which lib was causing the freezing.
I'm a very high level developer so I apologize for not being specific but I can revert to v0.10.0 and it will …
-
| Required Info | |
| --- | --- |
| Camera Model | R200 |
| Firmware Version | 1.0.72.06 |
| Operating System & Version | Ubuntu 14.04.4 LTS |
| Kernel Version (Linux Only) | 4.2.0-040200-generic |
|…