-
hello, My own board is based on xc7z030 , and i have done some modification for my board:
1. Modify the DDR configuration and MIO constrain. The same constrain is been tested for another SD card, whi…
-
The module of axi_ad9361 has four channels of enable and valid signal output. What is the function of these signals? If I set all these signals to 1, can the module work normally?
-
From Eugene Liu:
Hi, I am looking to do some experiments with SDR using openwifi on Analog Device adrv9364z7020 hardware.
I am studing channel estimate. From the csi document, 11a/g only 48 s…
-
Hi, I am looking to do some experiments with SDR using openwifi on Analog Device adrv9364z7020 hardware.
I am using 802.11a to my experiment, and I would like to know the source of CSI in Openwifi.…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
Hello, now I need to change the SSH IP address( default 192.168.10.122) ,bcause the ip address has conflicted. So, how to change the SSH IP address? Looking forward to a reply,thanks!
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …