-
Hello, thanks for your contribution. I have compiled BLEOTA for ESP32 (NodeMCU Dev board). It seems to work well, but when I connect from the webapp and try to upload a .bin I got an error: NACK on ST…
-
**The problem:**
There are a lot of devices and device types out there. With them comes a lot of different configurations ("datapoints"), making it difficult to configure a new device. Especially as …
-
Hi,
mir scheint dass sich das zurückfahren der leistung meiner Config langsamer abspielt als das hochsetzen. ich habe momentan den Parameter: ON_GRID_USAGE_JUMP_TO_LIMIT_PERCENT = 0 was ja anschein…
-
### What happened?
Beim seriellen Puffer für die MPPT Nachrichten kommt es (bei meinem System) mehrmals am Tag zu einem Überlauf.
Vermutlich tritt bei den meisten System dieses Problem nicht auf…
-
### Describe the issue you are experiencing
If you do gas metering with HM-ES-TX-WM_CCU and RaspberryMatic, the "Energy Counter - Central" field is increased with value of "Energy Counter - device" f…
soosp updated
2 months ago
-
### OCPP Version
OCPP2.0.1
### Describe the bug
Today i updated our Tarragon platform from EVerest 2024-05 to 2024-06. The board already had a working OCPP 2.0.1 dual charger setup. After the updat…
-
Unfortunately, coding changes to http_request does break the previous readout code for Shelly 3 EM.
I thought the below to be a workaround for code file shelly-3em-http-status-json.yaml
https://gi…
-
**Describe the bug**
Heater always heats at full Power (2000W) , seems SETFULLPOWER is not working to set it to 1000W.
**To Reproduce**
Steps to reproduce the behavior:
Send over MQTT:
{"CMD…
-
### OCPP Version
OCPP2.0.1
### Describe the bug
We noticed the following issue with our Tarragon platform and EVerest core 2024.05. After the OCPP client has successful connected to the backend the…
-
When using pedal powermeters rider position is part of FIT records.
Getting it will allow to change CdA estimate during ride analysis.
Associated PR is #4327