-
Pioreactor uses MQTT by default, and it's possible to swap out the broker quite easily. However it's not designed to have a completely separate orchestrator and device. So, the most straightforward wa…
-
### Variant
USART
### Control type
FOC
### Control mode
Voltage
### Description
Hello,
im having difficulty controling 2 motors,im trying to send commands via usart to control …
-
Hi everyone
I've created a set of tools for better MODBUS register analysis.
1.) Script for BLUETTI Modbus discovery-log parsing to ReadHoldingRegisters parameters. Discovers available ranges.
…
-
Hello, thanks for your great work, unfortunately I cannot get to to work with my unit SP04S034L4S200A.
I have included the log and the home assistant ESPHome configuration and hope to get some poi…
-
**Describe the bug**
Build error occurs on both Arduino IDE and Platformio
Additionally, it happens with both versions 2.3.3 and 2.3.4.
**Describe the hardware setup**
- Which microcontroller
…
-
I am using esp32 to control LED, having a ISSUE during power off:
After cut off the power, because of the capacitor, It takes about 2 seconds for voltage to drop from 3.3v to 1v. Esp32 browns ou…
-
Can/should we increase voltage? What could the control board take theoretically?
How much current/power can the control board take theoretically? And in practice?
-
Different IC from SN65HVD230 so that controls can use a logic analyzer since the voltages are lower
-
Below a template which is working with the above mentioned 3 phase circuit breaker with integrated leakage protection ([from Ali](https://de.aliexpress.com/item/1005005749883633.html)). I also have th…
-
Hi all,
Recently, I have been testing this tool in my AMD Ryzen 5 PRO 2400G.
While I managed to change the frequency to overclock my CPU, I haven't been able to modify the CPU core voltage. For my…