-
Im using your library for my own custom ffb joystick, and currently have a test setup with a old ffb stick. Basic functions work great at the moment, but the groves effect in ForceTest.exe doesnt work…
-
According to the [FlexTrak manual](https://github.com/daveake/HAB-Documentation/blob/main/FlexTrak%20Manual.pdf), there is a way to downlink extra telemetry through the flexavr. However, I'm not sure …
-
Hello, I am very new to this HoverBoard hacking but I've finally been able to upload the Firmware to the HoverBoard but now I'm having trouble controlling it with the Arduino.
I have been using Rob…
-
I help maintain the `Simple FOC` library.
This lib has moved to a new URL:
from: https://github.com/askuric/Arduino-FOC
to: https://github.com/simplefoc/Arduino-FOC
Arduino IDE is happy …
-
Hello,
I made a car controlled with a joystick, I use an arduino to communicate with the hoverboard motherboard. It works perfectly when I first try it after flashing the motherboard, but when I tu…
farev updated
3 years ago
-
hi I'm trying to use uart but with bad result on the USART3.
i have the timeout of the signal with the classic beep.
I tried different pin for tx and rx on Arduino nano with the correct value on hov…
-
Hello,
I was using the Arduino-FOC with the STM32 which worked nicely.
Now I set it up with an ESP32 Wrover (board version 1.0.4), trying both the current master-branch and dev-branch (31.08.20) and…
-
What are these mistakes? How to solve this problem? thank you!
e:\Program Files (x86)\Arduino\libraries\Arduino-FOC-v.1.5.0\src\FOCutils.cpp:108:55: error: 'MCPWM_SELECT_SYNC_INT0' was not declar…
-
I have hoverboard motors driving a golf push cart controlled remotely with an Arduino Pro Mini 3.3v through UART. I have the mode set to speed. The Arduino sends a command every 40msec over the buil…
-
I found this board integrate 3-current resistor and with F103 processor.
Can we use it to study simplefoc?