-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
### Is your feature request related to a problem? Please describe.
Wäre es möglich anhand eines Datenpunktes per MQTT den aktuellen Verbrauch an Open DTU zu geben und anhand dessen das Leistungslimit…
-
I just recently got the SKR V1.3 for the wiring simplicity and 32 bit stuff. Sadly, this has also created a few issues. The SPI jumpers are in the correct places and the +5V is in INT like it is suppo…
-
Hey, congratulations on the project! Very exciting developments for the esp32 community!
I'm not sure if this would be appropriate for the project, but it's a fun little trick from the AVR world th…
-
I cannot get the Linux driver for the W-LinkE to work correctly on Ubuntu 23.04
If I set the ModeS to Serial (red LED) It seems to be OK - /dev/ttyACM0 appears..
BUT if I set it to Flash mode (blu…
-
Hello,
I would like to try the 2.4 display (0x0154) with a multichannel oscilloscope project, which uses the STM32. On the Arduino Mega2560 the dispay works well. But at the moment, I am not able t…
-
# Proposed roadmap
- Hands-on, get an Arduino or ESP32
- C/C++ for embedded
- Programming without standard libraries
- Try not to use dynamic allocation
- Compilers (gcc, iar, Keil, etc..…
-
In my circuit design, there is no DEPIN, and R485 automatically switches between sending and receiving. How to modify and use your library?
-
Thanks for your big library support. But I had some problem with `"u8g2_font_unifont_t_bengali"` this font. I want to show Bengali word `"আমার"` on my ST7735 display. But it show me the output `আম ার …
-
Yes, There is a rule processor available in tasmota.
Haven't worked yet with it, but I'm not sure whether I really want to do so.
To me, it appears both quite quirked and very limited in capabilitie…