-
In RX_FSK/src/RS41.cpp, there's code based on https://github.com/einergehtnochrein/ra-firmware
Around line 648 the code is:
float Tp = (sensorTemp - 20.0f) / 180.0f;
float sum = 0…
-
Hello!
If does not decode signals from any newly bought IKEA Sparsnäs devices. Protocol changed? (Bought 2017-03-01).
Reference to thread on "Svenska Hemautomationsgruppen" on Facebook for detai…
-
- 同样是采用2.4G频率作为载波，但不同的通讯协议衍生出的通讯方式会有着天壤之别；仅仅在传输数据量上，就有着从1M每秒到100M每秒的差别。
- 蓝牙技术，这是一种基于2.4G频段的无线传输协议，由于采用的协议不同，所以有区别于其它2.4G频段而被称之为蓝牙技术。
- WiFi协议也是基于2.4G频段
- 6LoWPAN是基于IEEE 802.15.4的IPV6协议，WIFI是基于IEEE…
cisen updated
4 years ago
-
There are currently a couple of open PRs for new radio drivers or reworks of existing drivers.
These PRs are often quite big, so let's share the work and try to review each other's drivers.
- at…
-
**Describe the bug**
There's been a lot of GPS jamming observed on radiosondes out of Finland lately (well, really all over the place, but I'll use the Finland launches as an example).
If you take …
-
Trying to collate some thoughts on what auto_rx would need from a multi-channel SDR server (think: SpyServer, but actually open source) into one place, instead of scattered across multiple issues.
…
-
I want to thank a lot the autor M Suat Özgür for your work that a very very good job .
I have put your link in my website
http://misterdroid.ma/misterdroid/wigoHome.html
I have some question i…
-
### Description of the feature you're suggesting.
Bluetooth and WiFi both operate in broadly similar RF range: 2.4 GHz. Although there are significant differences between the two communication techno…
-
Our current version of FSKLab is trying to download those R packages, if they do not exist.
These libraries should be included in the FSKX file.
-
Hi Dave!
Would it be possible to transmit the signals via LimeSDR-mini instead of RPITX?
I guess this would be considered a feature enhancement, new to github not sure to add the "enhancement" f…