-
Teletype
knob max is 16383
param = "16380"
both should be 16384 ?
IN max = 16384 is OK
-
https://modwiggler.com/forum/viewtopic.php?p=3614625#p3614625
> I think this might be a Disting EX i2c issue actually... even directly setting a static value from a slow metro on monome crow the pa…
-
How could I go about building this without a GUI? I'm using it on a "headless" Raspbian-based machine (monome norns) which does not have GTK installed. I could install it but it will add 175MB to my i…
-
previously we got SUPERCOLLIDER FAIL (which wasn't always exactly true, but at least it pointed somewhere)
presently if jack fails (for whatever reason, but commonly (for DIY shield builders) due t…
-
https://monome.org/docs/modular/teletype/
TODO:
- [x] Create module and widget definitions
- [x] Emulate OLED screen
- [x] Handle keyboard input when the screen is clicked in rack
- [x] Pass G…
-
### What's the behavior you observed?
"Param" goes from 0 to 16380 - The middle and default is 8188
"IN" 10V is 16380
### What should have happened instead?
It should be like the hardware.
0…
-
Another report of the same issue here: https://llllllll.co/t/crow-help-norns/25863/174
When setting the input modes from norns, it seems the most recent call to set a mode is applied to both inputs…
-
I started down this roard with issue #525 and it's [come back around with crow](https://github.com/monome/norns/pull/839#issuecomment-501969281), so I'm starting a new issue to find a good way forward…
-
Ubuntu 18.04 Linux
1.x dev
Hi Michael !
The problem:
```
make[1]: Entering directory '/home/dlphilp/src/Rack/plugins-extra/monome-rack/firmware'
cc -DNULL=0 -o0 -D__AVR32_UC3B0256__ -fPIC …
-
`grid.refresh` in lua calls down directly to `monome_led_level_map`, which in turn calls blocking I/O.
at 115kbaud, i calculate that it takes 2.36ms to send the 34 bytes required for each quad in t…