-
## The problem
I have an OTGW device installed next to my boiler and integrated it in Home Assistant. Most of the things works fine and there are no blockers for performing streamlined tasks like a…
-
### The problem
I am using the new installation of Hassio on RaspPi 4. I have installed ZHA without any issue (EZSP = Silicon Labs EmberZNet protocol: Elelabs, HUSBZB-1, Telegesis by ZHA). But I am u…
-
Hi,
First off, thank you for the effort in creating this script.
I am trying to send commands but have no success doing so.
My setup is a Arduino Nano with a C1101 board I've flashed the nano w…
-
## The problem
My opentherma gateway looses its connection and become unresponsive. Problem is there after upgrading to version 0.105 or 0.106 don't know exactly anymore but still exists in version 0…
-
**Home Assistant release with the issue:** 0.103.4
**Last working Home Assistant release (if known):** n/a
**Operating environment (Hass.io/Docker/Windows/etc.):** hass.io
**Integration:** htt…
-
Hi,
My ATAG boiler has a 24Volt output, but can only deliver 100mA which is not enough for an ESP8266 to work properly.
So my question is:
If I connect the Opentherm Gateway to the 24v from th…
-
## The problem
I have De Dietrich Baxi DuoTec Compact boiler and I would like to use it with OpenThermGateway but in OTGW integration there is no service for dhw setpoint which could be use the s…
-
When testing my ESP8266 build the code seems to run fine, but when connecting the 24V adapter, after about 15 seconds this exception occurs:
> Exception 0: Illegal instruction
> PC: 0x40201774: OP…
-
Hi,
I'm using evfw3 on a DiY NanoCul and receiving communication from the evohome environment goes well.
I also tried to send commands but without result. Is sending of commands supported with ev…
-
## The problem
The OpenTherm Gateway integration has missing brand images.
We recently started this Brands repository, to create a centralized storage of all brand-related images. These images ar…