-
Thanks for your efforts to build this open source wifi project! I use a zed_fmcs2 device with openwifi in my office, and I want to capture some packages from openwifi. However, the wifi signal is too …
-
Hello,
The download link for the zcu102_fmcs2 SD card image is dead, the link returns
**Not Found
The requested URL /~xjiao/openwifi-1.2.0-leuven-2-64bit.img.xz was not found on this server.**
…
-
I am using Zedboard running with openwifi on it. I am willing to run it as 802.11n (or 802.11g) AP with 2.4GHz. I have changed file hostapd-openwifi.conf as following
interface=sdr0
driver=nl8021…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
Hello, I downloaded your latest img file for booting zc702, but I can't enter commands in SecureCRT after booting. I changed to ADI's official img file and can enter commands normally. I can also use …
-
1. Our image is used directly or you build your own image?
the openwifi release images.
2. What is your own modification?
add rf switch control for antsdr. I can control the rf switch gpi…
-
Thanks for your efforts on this great project. I am a graduate student at XJTU. Our team is looking forward to doing some tests on MPDU aggregation. From the provided documentation, OpenWiFi allows us…
-
In the top of the vivado project of ADRV9361-Z7035, there are many gpio interfaces such as gpio_bd, gp_out, gp_in, etc. I found out that these gpio ports are connected to the daughter board (as you sa…
-
When I use tcpdump, I can get timestamp like this,
![image](https://user-images.githubusercontent.com/92432416/167749940-0ed4230f-b8df-4d40-9323-b4e8cf5980ca.png)
Is this based on TSF? I don't thin…
-
My board is antsdr b220. I am running the openwifi project and found that when I working in 5GHz, the sniffer could not capture any beacon. When I switched to 2.4GHz, although I could capture beacon …