-
If an autoplay playlist is used in a vanilla RPi, it can be difficult to determine IP address of the device. (Seems arp -a doesn't work in some cases?)
It'd be very helpful if the IP address would …
-
Do we support this RTC chip: PCF2129AT ? I have tried to use i2c-rtc.dtbo but no luck. Not sure if I have enabled it correctly under FreeBSD 12.0 RBPI3B+ board.
-
### Creating a bug report/issue
#### Required Information
- DietPi version | `cat /boot/dietpi/.version`
```
G_DIETPI_VERSION_CORE=7
G_DIETPI_VERSION_SUB=2
G_DIETPI_VERSION_RC=3
G_GITBRANCH=…
-
Currently it's unclear if physical (wall clock) time synchronization will work past 40 days of ventilator unit uptime without system restarts. Additionally, clock synchronization is only implemented f…
-
I'm currently migrating a project from a Pi Zero with an AudioInjector Zero to a custom carrier board for a Pi Compute Module. I'm reusing the WM8731 codec IC and hoping to not have to do any new dri…
-
Running the tinkerboard:
Linux tinkerboard 4.4.103+ #1 SMP Fri Jun 22 16:14:49 CST 2018 armv7l GNU/Linux
linaro@tinkerboard:~/tinker_io/tinkerboard_io/build$ sudo ./spi_example
Successfully in…
-
Hello. As part of a project I've been tinkering with, I've been playing with the idea of turning a raspi
pico into a LPC ([Low Pin Count](https://www.intel.com/content/dam/www/program/design/us/en/do…
-
### Describe the bug
After upgrading from 20211118 (5.10.63) to 20220120 (5.10.92), CPU governors are not available and the Pi is locked to 600 MHz.
Downgrading to 1.20211118 kernel/bootloader r…
-
Hi,
I think we have either reached the limit of what the Pi can do or we possibly doing something wrong. Our display is current using 128x64 P2 ABC 1/32 panels....... and our layout is 2 high by 4 …
-
On imx6ull occasionally appeared problem with lack of soft restart caused due to too short time of holding `nRST` pin down during test campaigns.
Example run: https://github.com/phoenix-rtos/phoeni…