-
I honestly don't know what I did differently this entire setup worked last time.
Dependencies:
- I have a lan cable and a wifi card. The wifi card is connected to the tello drone
- DJITelloPy
…
-
Hi, I'm at the problem, connected with streaming video via djitellopy. I've seen same problems in closed and opened isses, but nothing changed after hours of editing, testing, copying and pasting.
Fi…
-
Hello,
I am working with a swarm of Tello EDU drones, which have a front camera that transmits video over UDP. I changed a bit the source code of `videoSource` and `gstDecoder` to support `udp` as …
-
When launching the sample Gazebo sim with ```ros2 launch tello_gazebo simple_launch.py``` and the driver with ```ros2 launch tello_driver teleop_launch.py``` then running ```ros2 service call /tello_a…
-
Heyo. I'm running into an error regarding the imu when trying to control the drone using examply.py.
The drone is able to obtain the video feed and takeoff however it does not respond to any other co…
-
if I make the drone yaw I can see that the streaming on rviz stops once there are no markers visible in the frame. I tested adding more markers, and indeed if I place enough of them around the drone, …
-
New frame support #162
Cruise speed #163
-
Hello, can swarm be applied to a group of tello drones or for EDU edition only?
thank you
-
Hi, I used two Tellos(not EDU) with your script with the help of two USB wi-fi dongles. However, when I disconnected and tried again with the same configuration, right now only one of the adapters can…
-
Build failure log output: https://build.ros.org/job/Nbin_ufhf_uFhf__drone_wrapper__ubuntu_focal_armhf__binary/18/console
Main issue :
```bash
23:16:26 CMake Error at cmake_install.cmake:60 (file)…