-
## Initialization sequence
1. `spin.adc.configureTriggerSource(ADCx, TRIG)`
2. Optional : `spin.adc.configureDiscontinuousMode(x, 0/1)`
3. `spin.adc.enableChannel(ADCx, channelx)`
4. Ìf soft…
-
### Test point name
chip_sw_adc_ctrl_sleep_debug_cable_wakeup
### Host side component
Rust?
### Opentitantool infrastructure implemented
Yes
### Silicon Validation (SiVal)
Yes
### Emulation ta…
-
Model: 4.7-S3 , V2.3
[ 16458][E][esp32-hal-adc.c:158] __analogRead(): Pin 36 is not ADC pin!
This comes on serial when it tries to read the battery voltage
The board would only work when conn…
-
Implement the HAL for the ADS7828EIPWRQ1. It is connected via I2C. This should go into the
ADS7828 class and will be very similar to the LSM9DS1 or LPS22HD.
The datasheet for the sensor: http://www…
-
I consider myself pretty familiar with the various google auth flows available via the python SDK - and how this interacts with gcloud-generated credentials.
We are using the bq SDK in the typical …
-
- Portuguese
https://onedrive.live.com/view.aspx?resid=247463EBB52E7E31!1103&cid=247463ebb52e7e31&app=WordPdf&authkey=!
http://www.luizbertini.net/tvdigital/livro_basico_tv_digital.pdf
http://ww…
-
It's unclear if we should keep ADC data unscaled so scaling can be applied later or if we should always scale to volts at the ADC pin using the internal voltage reference.
Pros:
- Simple and easy …
-
Hey, i'm in the process ov convertig a hoverboard into an escooter. My problem right now is that i cant turn the scooter of and i think the happens because the second motor and hall sensor is no longe…
-
Hi all,
I have just noticed TinyGo and willing to use it for my simple project that I will program an ESP32.
Although in [here ](https://tinygo.org/docs/reference/microcontrollers/esp32-coreboard-v…
-
Hello,
I use new ATtinys since few weeks (ATtiny84 before, without problem) and i need to have a minimum consumption in sleep mode.
After documention reading, i wrotte the little code below for ATTi…