-
Since I replaced my old coordinator with an CC2652 from https://www.tindie.com/products/slaesh/cc2652-zigbee-coordinator-or-openthread-router I often have issues like this: `Error while starting zigbe…
JvD12 updated
2 years ago
-
Process to get this far:
1) Updated Raspbian and Klipper to latest.
2) Built Klipper and flashed MCU using make clean, make, make install
3) Setup a "basic" RAMPS config
4) Referenced: https://git…
-
Faire un schéma électrique dans le but de choisir le bon microcontrolleur.
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Always when turning on the machine, part cooling fan runs at 100%. Entering temperature/fan s…
-
You can enter in the firmware resurrection wasp mode?
So in case of power failure it can pause and resume printing the extruder to get up so as not to damage the piece and resume printing when you wan…
-
### Steps to reproduce
1.the u21 chip or preamp stoped working the output voltage is not .014 v which is I think 20db
2.
3.
fixed once I find the chip name
### Actual behaviour
not enough vo…
-
Request Z-Stack 3.x.0 coordinator firmware capable of Active mode TX at +10 dBm and +20 dBm RF output power on CC2652P and CC1352P based radios. Specifically request firmware preconfigured with 10 dBm…
Hedda updated
2 years ago
-
**Describe what you would like changed, and why.**
60 energy / sec is too little for the thing. Water extractor is being used in 95% schematics with liquids involved. Nobody even cares about other li…
-
Hello,
would people be interested in electronic BOMs for both PCB versions?
I made a BOM for my build and could add it here and maybe add links to electronic resellers like mouser or similar (EU a…
-
Hi,
this looks great!!
I'd love to fork this project and create a narrow-format Eurorack module breaking out the USB sockets and MIDI IO on either/and DIN/TRS sockets.
Do you plan to release …