-
If sensorless homing is used, the default override for toolhead MCU includes a X_STOP definition, making sensorless x homing not possible. Found out by setting it up and wondering why X was moving wit…
-
Is there any reason against adding a G28 Z after the completion of a QGL?
The G32 command always adds a G28 Z at the end and i would love it to have that without editing the repo on my printer.
How…
-
# Issue
The issue seems to exist in many forms as I fix them. I've had it complain about the extruder. I also had it complain `Option 'sensor_type' in section 'heater_bed' must be specified` when I…
-
I get this error msg in the console upon start-up:
Error evaluating 'homing_override:gcode': jinja2.exceptions.UndefinedError: 'dict object' has no attribute 'sensorless_current_factor'
This happe…
-
It would be nice to have the Voron V0 implemented / supported. Many of us have one next to a V2.4 or Trident and it would be nice to have a similar config set on all printers.
-
Just change the M109 in M104 it's not needed to wait hotend temp before chamber soak.
And if chamber and hotend (temp > safe temp) is already hot it's just waiting hothend cooldown of hotend.
Befo…
-
I'm getting this error when trying to run BELTS_SHAPER_CALIBRATION:
`Traceback (most recent call last):
File "/home/pi/klipper/scripts/graph_accelerometer.py", line 259, in
main()
File "/home/pi…
-
Existing command 'TEST_RESONANCES' not found in gcode_macro rename (klipper error)
I get this when I have the accelerometer disabled in printer.cfg AND with the two new resonance testing variables …
-
getting a error when trying to add the primeline to my start print via variable_startprint_actions: "primeline"
i get a error of Error evaluating 'gcode_macro START_PRINT:gcode': gcode.CommandEr…
-
Due to the Prime Line Length, the prime line would always overextend on a v0 since it has Y+80 and Y+130 commands, resulting in an out of bounce error