-
Hello,
I'm trying to get a Pluto running locally attached to a Debian PC with OpenWebRX. It also works, but after a short while it kicks out, the system load ramps up to the max and the log says:
…
-
Since yesterday sdr++ has started crashing on startup.
The only way i can get it to start is to remove rtaudio.dll from the directory, then enter the program, set the sink to Network and then qu…
-
### What happened?
Every time I close the following flowgraph it shows these two messages:
`ERROR: READ LINE: -9
ERROR: READ INTEGER: -9`
```
options:
parameters:
author: User
catego…
smx12 updated
9 months ago
-
Description: sdr++ plugins are not in the expected directory after installing from testing. Expected directory is `/usr/lib/sdrpp/plugins/` the installed directory is `/usr/lib64/sdrpp/plugins`
Hot…
-
Hello,
same as #1530 , i have problems detecting hackrf in windows 10.
copying `rtl_433-rtlsdr-soapysdr.exe` to `PothosSDR\bin` installation solves the problem , however I just wanted to point o…
-
Hi everyone!
When I try to use PlutoSDR with GR-GSM to cature a signal get the error:
```CLI
$ grgsm_capture -a32 test.cfile -T10
gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.10.1.1
built-in source …
-
The firmware itself builds without any problems, but I can't build sd image for e310.
Here's output:
```
bash -c "source /opt/Xilinx/Vivado/2021.1/settings64.sh && bootgen -image /home/user/Docume…
-
I am trying to execute the following command:
`satdump record recording --source sdrplay --lna_gain 0 --if_gain 20 --samplerate 2e6 --frequency 100e6 --baseband_format f32 --decimation 16`
but ge…
-
Is dsd-fme capable of decoding text messages? There's a need for working replacement for SDRAngel's decoder, as it's heavily bugged.
-
In 0.25 you've added pkgconfig discovery for libusb and for some reason the code fails to discover libusb.
On FreeBSD libusb comes from the base and isn't discoverable by pkgconfig.
The alternat…