-
Can the sentence in the instruction be modified because the bitratemod isn't needed in the X9D!
X9D only does 400 kbit/s and does not allow lowering the bitrate to 115200 bit/s - modification is re…
-
I did trace and Map the Frsky R9M Lite Pro 1Watt compact Aluminium module:
CPU STM 32F303 CCT6
Pb12 - Nss (Semtech 1278)
Pb13 - Sck (Semtech 1278)
Pb14 - MiSo (Semtech 1278)
PB15 - Mosi (Se…
-
Radiomaster TX16S Hall
Frsky R9M 2019 - non access
Frsky R9slim+ rx
Unable to bind to R9Slim+ after upgrading to 2.3.12N495
Running ok on 2.3.11 (2.3.11-otx (4328055e))
Variant 219(according …
-
Hi, i have R9M 2019, i have try this but seems not working on mine side.
Taranis X9D 2019 -> R9M 2019 -> S.Port (from R9M 2019) -> Arduino Micro -> APM Planner 2.0
Is there big difference betwe…
zosko updated
3 years ago
-
## Bug report
**Issue details**
I give a try to the 4.1.0 Beta, coming from 4.0.7 and I get telemetry issue with Frsky F.Port
My setup is a Kakute F7 with R9 MX OTA Receiver.
Radio side there …
-
Requesting a feature to Clone Internal R9M on T18 to other Radio.
-
Thank you for this amazing project.
I’ve been trying to get express Lrs working with my set up but I’m having issues with the LUA script. R9m makes that elrs tune when I start up. But when I connec…
-
Is this tracker working with Taranis X9D+ 2019 and R9M2019 external module ?
I have problem to make tracker, i have try ghetto tracker but that not support S.Port. Currently i have issues to get S.Po…
zosko updated
3 years ago
-
Hello,
could a Jumper R900 Rx bind with a Frsky R9M Tx, both with ExpressLRS?
If yes, I'm in EU, so the R9M is configured with the 868MHz frequency, does the R900 work with 868MHz?
-
Hi, does anyone have telemetry issues?
after flashing to R9m and R9slim+ ota, i've got telemetry warning every 3-15sec, even when fly, still fly around 50m max no failsafe still.
My set
200Hz
1:2
…