-
Updated to 3.2 and jeti telemetry is not working.
Is there workaround or quick fix?
-
I tried to update my RTFQ Flip32 F3 OSD board from Cleanflight 1.12 to 1.14.2 on my RTFQ Flip32 F3 OSD board. Old Version in CLI said SPRACINGF3 so that is the firmware I installed. Flashing seemed to…
-
### Introduction
Hi there,
I’m building an INav Bixler and I’m struggling with available UARTs.
My understanding of programming is low, I can program small stuff within the Arduino IDE – but th…
-
using SPRacing F3 Evo and found broken ledstrip support ... i searched and found the offender
@DieHertz pls can you check and fix it
#4852 and the associated build `#469` breaks led strip support …
-
Here seems to be new chips used in the latest SPRACING F3+ODS chips I have tried BetaFlight, and CleanFlight and they seem to be working but in Inav it does not seem to be covered.
Things I have no…
-
I experienced hard faults with the generated linker for my STM32F3 Discovery board. After a long puzzle, I used a linker file from the CMSIS directory:
`SET(STM32_LINKER_SCRIPT /home/bart/STM32Cube…
-
My stm32f303 board works good but when I debug, it hangs when I give stand alone power, but after pressing reset button, It again starts work properly.
-
### Description
- Type: Bug
- Priority: Blocker
---------------------------------------------------------------
## Bug
**Target**
ALL
**Toolchain:**
GCC_ARM
When i build blinky proj…
-
With Betaflight version 2.9.1 Baro and Magnetometer are working fine.
Having flashed my SPRacing F3 with version 3.0.0 RC12 neither Baro nor Magnetometer are working.
pango updated
7 years ago
-
I'm trying to build a very low-cost, all-in-one quad. Similar to the CrazyFlie, but more like in the $35-$50 price range.
Originally I wanted to implement it on an ESP32, but according to #2970 be…