-
https://store.myairbot.com/flight-controller/omnibus-f7.html
New Omnibus F7 is available with dual gyro/acc...
Is someone already working on it?
-
Need a little help guys. I have a new R-XSR and telemetry works back to radio ok but no Pids or VTX are showing in the screens.
I do have this on softserial if this make a difference not sure.
FC is…
-
Hi,
I have a netmap vale setup on host. I have enabled support for multiqueue NIC from vale using the patch attached.
[netmap_vale_mq_2048.txt](https://github.com/luigirizzo/netmap/files/1695302/n…
-
I'm using [this 20mm setup](https://www.banggood.com/HGLRC-XJB-F440-TX20_V2-Omnibus-F4-Flight-Controller-OSD-40A-Blheli_32-3-5S-ESC-25100200350mW-VTX-p-1242937.html). I wanted to test whether the IRC …
-
Problem:
LED Strip is not functioning correctly. (verified LED Strip working correctly on other targets using 3.2.1)
Testing method:
I set all LEDs in the strip (0-7) to color mode with the colo…
SS396 updated
6 years ago
-
Scripts work perfect with my quads that have the micro receiver installed, but quads that have the nano version installed the script doesn't populate with values. It doesn't report any error or anyth…
-
Having a spare xsr-m and a Pikoblx F3 I decided I would experiment with this new protocol.
I have flashed the f.port firmware to the xsr-m and have the latest nightly flashed to the Pikoblx, connecte…
-
Having issues connecting to my Omnibus F4 Pro V2 with EZ GUI over Bluetooth.
My phone or tablet have no issue paring with the HS-06 but EZGUI reports "not data received" soon after powering on my T…
-
Can't get the magnetometer to be recognized on omnibus f4 v3. Frsky sbus on uart 6 (sbus, 5v,gnd) and gps on uart 1 are working. Mag to scl and sda will not for me. Any ideas
-
Results for Coreutils 6.10 head with new tabling with subsumptions between function call instances (revision 560e0b1) was done to investigate coverage issue. The data shows that Lines 1022 and 1023 of…