-
Using V4.4 Telink Flasher I loaded firmware on to 4 LYWSD03MMC sensors with no problems.
When I tried to load firmware on to some CGDK2 sensors I could not get them to activate.
The Device id ap…
-
Hi weliem,
I ran your example BLE applications on my ubuntu 22.04.3 pc which has bluetooth 5.2 hardware support and a debian 11 beagle-bone-black with a bluetooth adapter which supports bluetooth 5…
-
**Is your feature request related to a problem? Please describe.**
The case encloses electronic components that generate heat and there are no holes/slots for the heat to escape.
**Describe the …
-
### What happened?
A few days ago I updated nodejs and node-red on a raspi4. Prior to the upgrade all was well. Subsequent to the upgrade I'm seeing an issue that I believe I've narrowed down to …
-
### The problem
I have a LD2410 BLE(B) which is recognised. When I start the config-flow I get 'failed to connect'.
### What version of Home Assistant Core has the issue?
2023.2.4
### What …
-
### Description
I've already posted this in the E3-RRF repository:
https://github.com/bigtreetech/BTT-E3-RRF/issues/9
Someone suggested that it belongs better here.
### Steps to reproduce
…
-
Hello,
today I made a convesrion of my lywsd03mmc from BT to Zigbee.
Everything works fine, device correctly reported all statuses but only one issue is with OTA.
The Z2M indicates tat new update…
-
What about supporting MHP30 ? From the feature side it is very similar to ts80p. Externally it is basically the same iron (A B buttons, one OLED screen, type c pd and hotplate_vs_tip ), just in hotpla…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues and no issue is describing my issue
### The problem
Hallo Sascha,
ich lege das mal als Issue an, da das a…
-
## Version of the custom_component
Version 0.4.3
## Configuration
```yaml
I have one device configured via UI and you do not use YAML for config
```
## Describe the bug
I have just …