-
I have a problem to get code from rf remote. I got code when pressing button:
```
pulses: 50 possible protocol: arctech_switch_old
pulses: 50 possible protocol: arctech_switch_old
pulses: 50 pos…
-
hey there
after few hour of no transmission first transmission is ignored
I run it on a nodemcu with rxb6 receiver
any ideas
thanks
-
Hi,
(sorry about posting here also - I also posted in sui77/rc-switch #issue 472.)
I am using the SRX882 receiver together with a raspberry pi 4. The CS pin is connected to vcc.
I have three diff…
-
Hi,
I got a message from a pilight user that you had a similar project running called pihome. Your project looks really well, however, the sending and receiving implementations are far behind to what…
-
Hello,
while viewing the signal of my transmitter using an SDR, I noticed that after startup of the raspberry pi, the TX pin of the transmitter is apparently initialized to high and a continuous sign…
-
i have trouble getting sensor reading of standard Schrader TPMS sensors (434MHz)
a bit strange since they a very commonsense , mostly Fiat-Chrysler (eg. my Dodge) and Mercedes aso
I compared its sim…
-
I'm trying to add support for my remote: a DiO.
A sample recorded with SimpleRCscanner:
```
120,116,192,740,352,1124,224,188,120,76,548,440,400,356,116,1148,260,408,568,752,464,1528,296,120,140,2…
guyou updated
3 years ago
-
### Current Situation
I picked up a few of these boards and I am hoping I can get this project loaded up on them? Unfortunately I'm having a hard time picking the right board/platform (I think?)
h…
-
I'm getting the data transfer ok by using 'sudo ./codesend 123' on one raspberry pi and 'sudo ./RFSniffer' on another raspberry pi. However, for every time I transmit by using codesend, the sniffer e…
ksb86 updated
8 years ago
-
I haven't had any luck locating the manufacturer website, but this brand/model of driveway alarm is available everywhere - amazon, walmart, ebay - it's all over the place. The model number is HB-T001…