-
Input triggering should be added, allowing consistent alignment a measured voltage or current waveform to a DC level or AC zero-crossings.
This should also render continuous mode streaming usable in…
-
Question I have been asked - posting for TWCWG input
> I was recently tasked with implementing a S-111 thinning algorithm for irregular grids in our code base. My research into the old IHO site led…
-
in the wham jupyter example,
running
write_eqdsk(R,Z,psi,plas_currents,"wham_eqdsk.txt","/content/WHAM_Mirror Equilib")
produces this error:
----------------------------------------------------…
-
Howdy,
I recently picked up some of the SCT-024 200A CTs from your shop. I spent this evening debugging some weird measurement behavior where low currents (below 20-30A) were accurate, but higher …
-
Would it be possible to add an option to drag in from the right?
The ideal addition would be to have a menu on the left and additional content on the right (ala Google Currents).
[Left menu screensh…
-
- [x] codespell
- [x] pre-commit
- [x] PDF/Docx
- [x] publish HTML
- [ ] TOC
- [ ] fix look of the converted PDF/Docx/HTML
- [ ] create an index for the manuals
- [ ] add all manuals!
- [X] ad…
-
Firstly I tried lmic-otaa example with my setup, LoRa radio module (HopeRF RFM96) consumes 7.6uA all the time after sending packets. When trying your deepSleep codes everything works perferct ESP32-C3…
-
Find and organize code that attaches env vars to tracks. Currently, we have currents, eke, sst, ssh, dist to ice edge, depth, bottom slope, bottom roughness, distance to 200m isobath, distance to sho…
-
Hi, All
Recently I obtained data from Mistral (ALBA, Spain), with hdf5 format. I noticed the data structure seems not the same as you implemented. if possible to rewrite the hdf5 reader to include th…
-