issues
search
CircuitSetup
/
Split-Single-Phase-Energy-Meter
Split Single-phase Energy Meter
https://www.crowdsupply.com/circuitsetup/split-single-phase-energy-meter
MIT License
260
stars
57
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Problem in reading KWH in ATM90E32
#79
RamyaDidde
opened
6 months ago
1
one channel CT channel reading differently
#78
chaseadam
closed
1 year ago
26
Installation help
#77
k7faq
opened
1 year ago
3
Clarification on ESPHome configuration
#76
wilsongoode
closed
1 year ago
3
Energy meter solar kit installation in EU
#75
MassimilianoBiancucci
opened
1 year ago
2
Calibration in EU with 230V 50Hz
#74
MassimilianoBiancucci
opened
1 year ago
0
Getting 65535 values for Current and voltage
#73
abraralishah12
opened
1 year ago
9
Current Multiplier and Wattage report Fixes
#72
DragonMinded
closed
2 years ago
0
Fix a few things with Home Assistant example
#71
DragonMinded
closed
2 years ago
1
volt is reading 0.001000
#70
kimza90
closed
1 year ago
1
Why in the REGULAR ENERGY MEASUREMENT is done the product by 3200?
#69
amolina-chargevite
closed
2 years ago
1
Rebooting problem using emonESP with ESP32 with Arduino IDE
#68
albnar
closed
2 years ago
7
Error during compiling EmonESP scr.ino.
#67
albnar
closed
2 years ago
1
Alternative way to power the v1.4 board
#66
foureight84
closed
2 years ago
3
fuse suggestion
#65
chaseadam
opened
2 years ago
1
Current and ADC voltage limits, and the PGA
#64
raineth
opened
2 years ago
2
Voltage measurement under load?
#63
Cat-Ion
closed
2 years ago
1
CT Clamps not reading anything
#62
smartroad
opened
2 years ago
1
How to avoid using Emon software
#61
Rivazinho
closed
2 years ago
0
Use another CT sensor.
#60
Fresh878
opened
2 years ago
1
Can I use a Jameco 112366 with board 1.4 rev3?
#59
rb28z2
closed
2 years ago
1
No Power with 3 different Jameco 9V Ac Adapters
#58
luisgarcia87
closed
2 years ago
1
cannot "unset" emoncms server in emonesp
#57
chaseadam
opened
2 years ago
0
Repeated MQTT reconnects due to emon server unavailable
#56
chaseadam
closed
3 years ago
1
FR: Add ClientId to MQTT
#55
dimaj
opened
3 years ago
0
Any advice for an european transformer brand?
#54
wouldgo
closed
3 years ago
3
Negative values?
#53
scfigg
closed
2 years ago
1
No AC adapter available
#52
eavyon
closed
3 years ago
4
support for high frequency AC transformer?
#51
asalexsu
closed
2 years ago
5
Setting up Split Single Phase meter on emoncms.org
#50
farzadb
closed
3 years ago
3
Calibration emonESP from Russia
#49
skribbl84
closed
2 years ago
1
Board Compatability
#48
johnsethwatkins
closed
3 years ago
1
fried split circuit v1.4 rev 2
#47
chaseadam
closed
3 years ago
2
What is the latest version 2.6 or 2.6.1
#46
JPElectron
closed
3 years ago
3
Reading 65k from voltage register
#45
TSMotter
closed
2 years ago
5
Power is showing negative now?
#44
scfigg
closed
3 years ago
7
What Calibration setting value to use for 200A CT?
#43
JPElectron
closed
3 years ago
5
Can't connect to Emoncms after updating from 2.5.7 to 2.6
#42
zirdum
closed
3 years ago
7
Switched routers... device won't connect to wifi
#41
zirdum
closed
3 years ago
1
Verifying Power Factor values
#40
chaseadam
closed
3 years ago
4
fix config loading to accept '0' to disable PGA
#39
chaseadam
closed
3 years ago
0
EmonESP fork
#38
chaseadam
closed
3 years ago
3
Can't flash latest esphome example
#37
jarrettv
closed
3 years ago
3
Can we measure current with one CT only?
#36
aaamitsingh
closed
4 years ago
8
Won't Connect to MQTT Until Restart
#35
rothnic
closed
3 years ago
2
No readings from CT2
#34
neilrees
closed
4 years ago
3
I am getting smoke from board on IC2
#33
RichBoehle
closed
4 years ago
1
When in STA mode connected to AP and AP goes away, will not auto reconnect
#32
kirkdwilson
closed
4 years ago
1
emonESP split phase - can I use for single phase?
#31
m-d-johnson
closed
4 years ago
6
Voltage * Current != Active Power, is that correct?
#30
manutenfruits
closed
4 years ago
4
Next