-
first,**I use the master branch code.**
cargo.toml
```
[package]
name = "esp32-mipidsi-test"
version = "0.1.0"
authors = ["song "]
edition = "2021"
license = "MIT OR Apache-2.0"
[dependenci…
-
Hello, I want to read audio data from ADC using I2S of STM32F411 microcontroller. I want to use DMA to do so. But I have no idea how to configure it. I have created a topic on the rust embedded forum,…
-
### Board
ESP32 S3 wroom 1
### Device Description
Just an USB port, and a TI battery monitor.
### Hardware Configuration
Currently only working with just the CPU, but has a TI battery m…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Unlike their more expensive STM32F407 cousins, the STM32F4x1Cx MCUs do not have a luxur…
-
At the moment DMA can be done with peripherals. One cannot use the hal to configure the dma subsystem to have arbitrary dma transfers, or transfers triggered by Timer peripherals. How about adding som…
-
Clocks are an important part of all microcontrollers that I know of, and I believe this is a topic that should be covered in embedded-hal. I don't have a good enough overview over the topic to know ev…
-
Currently, SPI device traits deal with a transaction concept, which implies transmission of some data, while the CS is set for the whole duration. There is currently no guidance on how should the peri…
-
The driver API does not have support for controlling the power stage or reading a fault. There's a bit of a difficulty here, since the same pin is used for both, and I don't believe there are traits i…
-
I am using a blue pill with the default settings from this repository. When testing I noticed that whenever I set the system clock to anything else than the default settings, the code panics.
Here'…
-
Currently the bitstream's mimetype is missing from the `bitstream` model. The client already passes the mimetype in `create_bitstream()`. If this was available in the model it could be used instead of…