-
The picture and some descriptions do not match my board. Is mine a ripp of …
-
### Description
- [x] Research best hardware for this
- [ ] Count doors and windows
- [ ] Take off existing door and window sensors
- [ ] Get Z-Wave / Zigbee sensors
- [ ] Install on all window…
-
Hi there!
Using this conf file (built off the one provided - /config/rtl_433/rtl_433.conf - password section)
Version: ` 2024.6.0`
```
## version 2024.3
report_meta stats
report_meta t…
-
I have been trying to test this chip set with your example OOk_Receiver. I converted the OOK_Receiver.ino to a main.cpp file. I changed the frequency in this file by setting #define RF_MODULE_FREQUE…
-
Thank you for open sourcing the Ensemble Oscillator! It's been great to be able to dive into the code and start tweaking. To get the code the compiling, I had to deviate slightly from the README, so w…
-
Thank you for your efforts for license free long range audio transmissions for emergencies.
It would be nice to have this implemented on STM32WLE5CCU6 chip. There is an inexpensive Ebyte module …
-
In the board_config.py, how we define unused pins? Getting always this AssertionError and I think it's because bad board configuration. I using the NiceRF LoRa1276 and a rasp zero w.
```
/home/pi…
kauly updated
6 years ago
-
## Current Behavior
Using a RC Link system like [mLRS ](https://github.com/olliw42/mLRS) that support RC over MSP, there is currently no way to get receiver and link information to the OSD and for bl…
-
Hi!
I've tried running the example on an ESP32 with the 433MHz wheel sensors, but no luck. Communication with the CC1101 is working correctly; it initializes everything, but it doesn’t receive any …
-
Hey @dj5qv,
thanks for this awesome piece of software! [DXlog](http://www.dxlog.net/) recently started supporting TCP sockets instead of COM ports. This would finally allow me to record and play DVK…
dh1tw updated
2 years ago