-
Previously we were using PN532 NFC Module.
This module works using I2C (and SPI as well), and worked fine, but for new desing we would like to test another board (Cheaper and smaller)
The Board to…
-
Je fait cette isse pour suivre le development d'un projet de controle de culture indoor, avec un ESP8266, ou serait mesurés l'humidité au sol, ainsi que l'humidité et la temperature de l'air pour etre…
-
Feature to send an email to a specified address when a given condition on is met would improve use cases.
-
Hi
Seems to have a resistance issue
Tested with 220ohms and 9kohms, seems to have some spurious signal, so, after few seconds the movement is stopped.
With 220 ohms it always happens, with 9k it ha…
-
-
Hi, I really like this project. How did you find the CAN codes? I plan to use a similar setup but read the codes of button presses on the M1 and M2 steering wheel buttons (since they have no use in my…
-
I install slice of radio and two temp sensors for testing and I am getting temp into the message bridge CSVlogs. Install Temperature -master per instructables site. DB setup is complete and when I r…
-
# Open Energy Monitor
- https://openenergymonitor.org/
- https://shop.openenergymonitor.com/
- https://shop.openenergymonitor.com/emonpi-3/
- https://shop.openenergymonitor.com/emontx-v3-ele…
-
Am really interested if there is a way to use a blue pill with my x-arcade replacing that ps2 port with it so i can get usb functionality like
https://idmedia.no/projects/retrobox/replace-your-x-arc…
-
Mooi idee! Heb je alle componenten al in huis? Zo niet, dan is er een goedkoop alternatief voor de dure pressure sensor: http://www.instructables.com/id/How-To-Use-Touch-Sensors-With-Arduino/. Ook kan…
shrls updated
6 years ago