-
AP-client mode
when use cat /pro/interrupts ,tx_itrpt didn't increased,and the number of tx_itrpt is not equal to xilinx-dma-controller.
At this time, ILA was used for loopback test, and it was f…
-
I haven't seen the hardware requirements of this project, or can this project run on any hardware supported by openwifi?
-
1. Our image is used directly or you build your own image?
yours
3. Versions: OS, Vivado, openwifi/openwifi-hw repo branch and commit revision
OS: ubuntu 20.04
4. Board/hardware type
ANTSDR E310
…
ghost updated
2 years ago
-
Dear Mr. Jiao,
Which set of hardware is used when you realize CSI fuzzy [https://github.com/open-sdr/openwifi/blob/master/doc/app_notes/csi_fuzzer.md](url). Can other hardware achieve the same effect…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
1. Our image is used directly or you build your own image?
2. What is your own modification?
3. Versions: OS, Vivado, …
-
I use the DEMO board of ADRV9361-Z7035, which has fully run the openwifi function, and my mobile phone can be connected to this board normally, and the throughput test can also reach 30Mbps. I want to…
-
Hi I am trying to analyze the timestamp returned by the IQ capture program. I use the MATLAB script 'test_iq_file_display.m' to analyze the saved 'iq.txt' file and visualize the timestamps. However, a…
gxhen updated
2 years ago
-
FTM protocal is used for ranging, details can be found here:https://www.researchgate.net/publication/328327674_Verification_Accuracy_Evaluation_of_WiFi_Fine_Time_Measurements_on_an_Open_Platform.
I j…
-
1.How can I set the protocol type of 802.11? At present, hw_mode in the conf file can only support 802.11a/g, and 802.11n will be displayed as undefined.
2.At the same time, if I want to set the 802…
-
Hello,
I am trying to simulate 2 projects separately, the 'openofdm_tx' and the 'openofdm_rx' modules in Vivado 2018.3. I wanted to run some tests for the legacy type packets. So I have a file that…