-
I recently upgraded to the Pi4 controller and the network service isn't loading properly on remote computers.
The old Pi3 controller loaded properly using Firefox/Chrome/Edge/Safari.
With my cur…
Q1WP updated
7 months ago
-
I'm using @abandonware/noble@1.9.2-10 on a Raspberry PI3 with Node v12.16.3
noble.reset() gives me this error:
```
TypeError: noble.reset is not a function
.....
at listOnTimeout (interna…
-
Hi, i am doing an project like you project but i have used RPlidar A1 instead KINECT. So i want to ask you how to create launch file to use with RPlidar A1( i use motor with encoder and arduino + pi3…
-
## Setup:
- Which version of Windows you chose
Windows 10
- Raspberry Pi model
RPI3 B+
- Name of SD card you tried to flash (some are too slow or too small)
Kingston 32GB Micro SDHC
- What da…
-
whenever i try to run **sudo miracle-wifid** i get this:
**WARNING: supplicant: wpa_supplicant or driver does not support P2P (supplicant_status_fn() in ../../../src/wifi/wifid-supplicant.c:1698)**
…
-
Hi,
Just tried teleconsole on a Pi3 that has a very custom Linux setup built with busybox. It has no sudo nor the z tar switch, so the installer fails. But manually untarring everything perfectly w…
-
@NeddySeagoon http://bloodnoc.org/~roy/Pi3_64bit/aarch_chroot.bz2 or get the stock gentoo
arm64-stage to overlay improvements , thus far getting emulation is vexing.
inject more @sakaki- packa…
-
I can't seem to get my Pi0W's bluetooth adapter to be recognized, but onboard wifi works fine.
I saw that the issue https://github.com/hypriot/image-builder-rpi/issues/174 was marked as solved for…
-
I'm using this to create images for a Raspberry Pi 4, and while running with `pi1` seems to work okay, proper support would be nice to have. Using `pi3` results in a missing network connection, so I c…
-
Hi,
use the pyfingerprint sucessfull on mi Pi3b , just changed to a Pi4 and installed the fingerprint. It works, but stop working after a second... on the Pi3 the scanner runs until a fingerprint i…